| Directional Valve
QCV08-05 = Check valve =
A screw-in, cartridge-style, hydraulic check valve for use as a blocking or load-holding device.
The QCV08-05 allows flow passage from ① to ②, while normally blocking oil flow in the opposite direction. The cartridge has a fully guided check which is spring-biased closed until sufficient pressure is applied at ① to open to ②
|Proof Pressure (bar)||Flow||Internal Leakage
|User Temperature(0C)||Operation Voltage|
|240||350||30 lpm/8 gpm||0.1 cc/min
(First remove inside air)
|-400~ 120||± 15% voltage|
．100% full inspection for all products.
．Standard product life tested for million cycles.
．1000-hour salt-spray anti-corrosion protection tested.
．Raw material, oil, electroplating, etc. in manufacturing process with RoHS compliance.
．All coils tested by third party notarization inspection & CE certified.
．Heat Treatment on spool, poppet, cage for long life and low leakage.
．Coil rated for continuous duty
．Customized coil voltages and terminations
．Cartridges are customized.
．Manual override option.
．Multi industrial applications.
．Coil mold design with sufficient demands.
Operating Pressure: 240 bar (3500 psi)
Proof Pressure: 350 bar (5075psi)
Flow: 30 lpm (8 gpm)
Internal Leakage: 0.1cc/minute
User Temperature: -40° to 120°C (-40° to 248°F) with Buna seals;
User Temperature: -26° to 204°C (-15° to 400°F) with Fluorocarbon seals
Filtration: With S: 100 mesh (149 micron)
Operation Voltage: ±15% voltage
Cavity: Q08-2; See page Q08-2