QSV08-26

DESCRIPTION:
A solenoid-operated, 2-way, normally open, needle-type, direct-acting, screw-in hydraulic cartridge valve, intended for blocking or load-holding in low flow circuits.
When de-energized, the QSV08-26 blocks in both directions until pressure rating is achieved. When pressure on port ① exceeds rating, flow is allowed to pass from ① to ②. When energized the needle point lifts to allow flow in both directions. Port ② is recommended as the load-holding port.

FEATURES
．100% full inspection for all products.
．Standard product life tested for million cycles.
．1000-hour salt-spray anti-corrosion protection tested.
．Raw material, oil, electroplating, etc. in manufacturing process with RoHS compliance.
．All coils tested by third party notarization inspection & CE certified.
．Optional waterproof Coils rated up to IP65.
．Heat Treatment on spool, poppet, cage for long life and low leakage.
．Coil rated for continuous duty
．Customized coil voltages and terminations
．Cartridges are customized.
．Manual override option.
．Multi industrial applications.
．Compact size.
．Coil mold design with sufficient demands.

RATINGS
Operating Pressure: 210 bar (3045 psi)
Proof Pressure: 350 bar (5075 psi)
Flow: 1 lpm (0.26 gpm)
Internal Leakage: 0.10 cc/minute
User Temperature: -40° to 120°C (-40° to 248°F) with Buna seals;
User Temperature: -26° to 204°C (-15° to 400°F) with Fluorocarbon seals
Filtration: With S: 100 mesh (149 micron)
Operation Voltage: ±15% voltage
Cavity: Q08-2; See page Q08-2