| Solenoid On/Off Valve
Spool-Type Solenoid Valve, Spool 4-Way, 3-Position
QSV10-47D = Reversing valve, 4-Way, 3-Position, Float median Position =
A solenoid-operated, 4-way, 3-position, direct-acting, motor spool, screw-in hydraulic cartridge valve.
When de-energized, the QSV10-47D blocks flow to ③, while allowing flow from ② to ①, and from ④ to ①.When coil S1 is energized, flow is allowed from ③ to ④, and from ② to ①. When coil S2 is energized,
flow is allowed from ③ to ②, and from ④ to ①. In circuits where work port flows are unequal due to cylinder ratios, the higher return flow should be directed to port ②.While ① may be fully pressurized, it is not intended for use as the valve’s inlet.
|Proof Pressure (bar)||Flow||Internal Leakage
|User Temperature(0C)||Operation Voltage|
|210||390||22 lpm/6 gpm||80 cc/min
(First remove inside air)
|-400~ 120||± 15% voltage|
．100% full inspection for all products.
．Standard product life tested for million cycles.
．1000-hour salt-spray anti-corrosion protection tested.
．Raw material, oil, electroplating, etc. in manufacturing process with RoHS compliance.
．All coils tested by third party notarization inspection & CE certified.
．Optional waterproof Coils rated up to IP65.
．Heat Treatment on spool, poppet, cage for long life and low leakage.
．Coil rated for continuous duty
．Customized coil voltages and terminations
．Cartridges are customized.
．Manual override option.
．Multi industrial applications.
．Coil mold design with sufficient demands.
Operating Pressure: 210 bar (3045 psi)
Proof Pressure: 390 bar (5700psi)
Flow: 22 lpm (6 gpm)
Internal Leakage: 80 cc/minute
User Temperature: -40° to 120°C (-40° to 248°F) with Buna seals;
User Temperature: -26° to 204°C (-15° to 400°F) with Fluorocarbon seals
Filtration: With S: 100 mesh (149 micron)
Operation Voltage: ±15% voltage
Cavity: Q10-4; See page Q10-4
|Poppet-Type Solenoid Valve||Spool-Type, Solenoid Valve|
|Proportional Flow Control Valve, 2-Way||Proportional Flow Control Valve, 4-Way|