| Solenoid On/Off Valve
Poppet-Type Solenoid Valve, Normally Closed
QSV10-22 = Poppet, 2-Way, Normally Closed =
A solenoid-operated, 2-way, normally closed, piloted poppet-type, screw-in hydraulic cartridge valve, for blocking or load-holding in applications requiring low internal leakage.
When de-energized, the QSV12-20 acts as a check valve, allowing flow from ① to ②, while blocking flow from ② to ①. When energized, the cartridge’s poppet lifts to open the ② to ① flow path. In this mode, flow from ① to ② is severely restricted. If this path is required, see model QSV12-22.
|Proof Pressure (bar)||Flow||Internal Leakage
|User Temperature(0C)||Operation Voltage|
|210||350||45 lpm/12 gpm||0.15 cc/min
(First remove inside air)
|-400~ 120||± 15% voltage|
．100% full inspection for all products.
．Standard product life tested for million cycles.
．1000-hour salt-spray anti-corrosion protection tested.
．Raw material, oil, electroplating, etc. in manufacturing process with RoHS compliance.
．All coils tested by third party notarization inspection & CE certified.
．Optional waterproof Coils rated up to IP65.
．Heat Treatment on spool, poppet, cage for long life and low leakage.
．Coil rated for continuous duty
．Customized coil voltages and terminations
．Cartridges are customized.
．Manual override option.
．Multi industrial applications.
．Coil mold design with sufficient demands.
Operating Pressure: 210 bar (3045 psi)
Proof Pressure: 350 bar (5075 psi)
Flow: 45 lpm (12 gpm)
Internal Leakage: 0.15 cc/minute
User Temperature: –40° to 120°C (-40° to 248°F) with Buna seals;
User Temperature:-26° to 204°C (-15° to 400°F) with Fluorocarbon seals
Filtration: With S: 100 mesh (149 micron)
Operation Voltage: ±15% voltage
Cavity: Q10-2; See page Q10-2
|Poppet-Type Solenoid Valve||Spool-Type, Solenoid Valve|
|Proportional Flow Control Valve, 2-Way||Proportional Flow Control Valve, 4-Way|